We often have the phenomenon of flying ink in the process of ordinary printing. What is the reason for this? Next, let's take a look at the reasons for the phenomenon of flying ink!

1、印刷時，空氣相對濕度小，就有了飛墨產生，濕度加大時，電荷減少，飛墨量變小。

1. When printing, when the relative humidity of the air is small, there is flying ink. When the humidity increases, the charge decreases and the amount of flying ink decreases.

2、如果油墨中潤版液太多，黏度急劇下降，墨絲變短，會產生嚴重的飛墨現象，同時，浸入油墨的潤版液還會腐蝕金屬墨輥，在墨輥表面形成親水層而排斥油墨，造成金屬墨輥脫墨。

2. If there is too much fountain solution in the ink, the viscosity will drop sharply and the ink wire will become shorter, which will produce serious ink flying phenomenon. At the same time, the fountain solution immersed in the ink will also corrode the metal ink roller, form a hydrophilic layer on the surface of the ink roller and repel the ink, resulting in Deinking of the metal ink roller.

3、墨輥上墨層越厚，飛墨越大。遇到紙張性能對油墨黏附力不好的情況，就容易造成墨輥堆墨，從而產生飛墨現象。

3. The thicker the ink layer on the ink roller, the larger the flying ink. In case of poor adhesion of paper performance to ink, it is easy to cause ink accumulation on the ink roller, resulting in ink flying phenomenon.

4、高分子量油墨的連結料，在油墨分裂時容易拉成長絲，產生飛墨。

4. The binder of high molecular weight ink is easy to pull into filaments when the ink is split, resulting in flying ink.

5、油墨黏度過大，油墨在墨輥出口處被拉長，易產生飛墨，同時還會造成傳墨不勻，使紙張拔毛脫粉，紙張從橡皮布上剝離困難、易花版、掉版等，黏度過小，墨層分裂不佳，也容易產生飛墨，同時容易使油墨乳化、糊版、網點擴大，影響印刷產品質量。

5. If the viscosity of the ink is too high, the ink will be stretched at the outlet of the ink roller, which is easy to produce flying ink. At the same time, it will also cause uneven ink transmission, which will make the paper pluck and powder, make it difficult to peel the paper from the blanket, and it is easy to flower and drop the plate. If the viscosity is too small, the ink layer will not split well, which is also easy to produce flying ink. At the same time, it is easy to emulsify the ink, paste the plate and expand the dot, which will affect the quality of printing products.

另外，墨輥表面凹凸不平及表面干結龜裂時，部分油墨層加厚，墨霧量加大，也是產生飛墨現象的因素之一，還需要我們注意的是，在印刷時，要控制印刷的速度，如果速度過快，造成飛墨現象的幾率就會更高。

In addition, when the surface of the ink roller is uneven and the surface is dry and cracked, some ink layers are thickened and the amount of ink mist is increased, which is also one of the factors causing the phenomenon of flying ink. We also need to pay attention to that when printing, we should control the printing speed. If the speed is too fast, the probability of causing the phenomenon of flying ink will be higher.

以上就是為大家介紹的有關濟南精裝書制作的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.helloyong.com/

The above is a detailed introduction to the production of hardcover books in Jinan. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.helloyong.com/